Removing The Wg311T Software; Upgrading The Wg311T Software - NETGEAR WG311T User Manual

Removing the WG311T Software

You can remove the wireless adapter software in these two ways:
• Navigate the Windows Start menu to the WG311T Wireless PCI Adapter program group,
select the uninstall option, and follow the screen prompts.
• Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select
the WG311T Wireless PCI Adapter option, and follow the screen prompts.

Upgrading the WG311T Software

Upgrades may be available at the NETGEAR Web site. To install an upgrade, follow these steps.
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR Web site Support page.
3. Remove the WG311T software from your computer.
4. Shut down the computer.
5. Remove the WG311T adapter from your computer, and restart your computer.
6. Run the installer that you downloaded (the file ends in .exe).
7. Follow the installer instructions, and if prompted, then restart your computer.
User Manual for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
v4.0, February 2006
3-11