Viewing Contacts - Motorola i730 User Manual

Contacts
Note: You can store numbers up to 64 digits long,
but every 20 digits must be separated by a
pause or wait. See "Creating Pauses and
Waits" on page 41.
• A Speed Dial number — When you store a phone
number, it is assigned a Speed Dial number. You
can accept the default Speed Dial number or
change it.
• A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This icon
P
appears to the left of the Contacts type icon if
a voice name is assigned.

Viewing Contacts

To access Contacts:
From the main menu, select Contacts. -or-
If you are on a call: Press m. Select Contacts.
To view entries:
1 From the Contacts list, scroll to the entry you want
to view.
2 If an entry has more than one number or address
<>
stored, surrounds the Contacts type icon.
Scroll left or right to view the icon for each number
stored in the entry.
3 Press O to view the entry.
38
4 Scroll to view the other numbers and addresses
stored for the entry.
Tip: To view more entries, continue scrolling.
Searching for a Name
To search for a name in Contacts:
1 From the Contacts list, press A under Search.
-or-
If Search is not one of your options: Press m.
Select Search.
2 Enter the name you want to see. See "Entering
Text" on page 33.
3 Press O.
Your phone finds the name you entered or the
nearest match.
Showing Only Direct Connect numbers
and Talkgroups
To set Contacts to show only entries that contain
Direct Connect numbers and Talkgroup entries:
1 From the Contacts list, press m.
2 Select Filter.
3 Set this option to Show DC.