Viewing Contacts - Motorola i570 User Manual

A number or address — Each Contacts entry must contain
a number or address. This may be any type of phone
number, Direct Connect number, Group number,
Talkgroup number, email address, or IP address.
Note You can store numbers up to 64 digits long, but every 20
digits must be separated by a pause or wait. See "Creating
Pauses and Waits" on page 126
A Speed Dial number — When you store a phone number,
it is assigned a Speed Dial number. You can accept the
default Speed Dial number or change it.
A voice name — If you create a voice name for a number,
you can then dial that number by saying the voice name
into your phone. This icon
Contacts type icon if a voice name is assigned.

Viewing Contacts

Press
To view entries:
1.
From the Contacts list, scroll to the entry you want to
view.
2.
If an entry has more than one number or address stored,
<>
to view the icon for each number stored in the entry.
3.
Press
4.
Scroll to view the other numbers and addresses stored
for the entry.
Tip To view more entries, continue scrolling.
120 Section 2F: Using Contacts
M
> Contacts.
surrounds the Contacts type icon. Scroll left or right
O
to view the entry.
P
appears to the left of the