Bluetooth Settings - Samsung Galaxy Note 3 User Manual

• Network notification: alerts you when a new WAP is available.
• Passpoint: allows you to connect to passpoint-enabled Wi-Fi
Access Points automatically. Touch and slide the slider to the
right to turn it on
• Sort by: allows you to sort by alphabet or RSSI.
• Keep Wi-Fi on during sleep: allows you to specify when to
disconnect from Wi-Fi.
• Always allow scanning: allows the Google location service
and other apps to scan for networks, even when Wi-Fi is turned
off.
• Auto network switch: allows the device to automatically
switch between a Wi-Fi network or a cellular network.
• Auto connect: allows you to be automatically connected to an
AT&T Wi-Fi Hotspot as soon as your phone detects it.
• Install certificates: allows you to install security certificates
that you have on a MicroSD card.
• MAC address: view your device's MAC address, required
when connecting to some secured networks (not configurable).
• IP address: view your device's IP address.
87
.

Bluetooth settings

In this menu you can activate Bluetooth, view or assign a
device name, activate your phone so other Bluetooth devices
can discover it, or scan for other, available Bluetooth devices
with which to pair.
Activating Bluetooth
1. From the Home screen, tap
Connections.
2. Tap the ON/OFF slider, located to the right of the
Bluetooth field, to turn Bluetooth ON
The Bluetooth icon
Additional Bluetooth Settings
When Bluetooth is on, additional settings are available.
1. From the Home screen, tap
Connections Bluetooth.
2. Tap Scan to scan for nearby discoverable devices. After
searching, tap a device to pair with it. For more
information, refer to "Pairing Bluetooth Devices" on
page 159.
3. Press and select a Bluetooth setting to configure:
Settings
Connections
.
is displayed on the status bar.
Settings
Connections