Table of Contents
Advertisement
[Example]
When displaying the MENU selection bar. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '72' '35' '34' '0D'
00r54
4.4 Direct commands
The direct commands are used to numerically adjust the volume and keystone.
When the computer sends the command without adding the setting value, the projector returns the received com-
mand with the current setting value added as a data code.
ITEM
VOLUME
KEYSTONE (vertical)
How to set the value
Use the character or ASCII code as shown below to set the value.
Character
+
ASCII
'2Bh'
[Example]
When setting the volume to 15. (Values enclosed in quotation marks are ASCII codes.):
Command sent from the PC, etc.
'30' '30' '56' '4C' '31' '35' '0D'
00VL15
4.5 Function commands
screen is being displayed, the splash screen is only canceled.)
The mute commands are used for the mute setting of this projector with the 0 (HEX: 30h) and 1 (HEX: 31h).
ITEM
AV MUTE
4.6 Menu setting commands
The menu setting commands are used for the menu setting of this projector. If the personal computer sends the
command without attaching the data code, the projector attaches to the received command its current setting
value as the data code and send it back to the PC.
ITEM
COLOR ENHANCER
COLOR ENHANCER-
USER-GAMMA MODE
COLOR ENHANCER-
USER-Brilliant Color
COLOR ENHANCER-
USER-RGB-COLOR
COLOR ENHANCER-
USER-RGB-TINT
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR TEMP.-USER
(CONTRAST)
'30' '30' '72' '35' '34' '0D'
00r54
(Not executable in stand-by mode. Possible only to read during muting.)
Character
VL
56h 4Ch
KS
4Bh 53h
-
0
1
'2Dh'
'30h'
'31h'
'30' '30' '56' '4C' '31' '35' '0D'
00VL15
(Not executable in stand-by mode. When the mute commands are sent while the splash
Character
MUTE
4Dh 55h 54h 45h
(Not executable in stand-by mode. Possible only to read during muting.)
Function
Character
CE
43h 45h
CEU1GS
43h 45h 55h 31h 47h 53h
CEU1B
43h 45h 55h 31h 42h
CEU1C
43h 45h 55h 31h 43h
CEU1T
43h 45h 55h 31h 54h
PP
50h 50h
QQ
51h 51h
A
41h
P
50h
Status code returned
from the projector
Function
ASCII
2
3
4
'32h'
'33h'
'34h'
'35h'
Status code returned
from the projector
Function
ASCII
ASCII
0 (AUTO), 1 (PRESENTATION), 2 (STANDARD),
3 (THEATER), 4 (USER)
0 (DYNAMIC), 1 (NATURAL), 2 (DETAIL)
00-10
±10
±10
±30
±30
1 (STANDARD), 2 (HIGH), 3 (LOW), 4 (USER)
±30 ±30 ±30 (R, G, B)
7
Description
Command operating the same as the
MENU button
Command receipt confirmation
(Command echo back)
Data
00-21
±20
5
6
7
8
'36h'
'37h'
'38h'
Description
Command for setting the volume
Command receipt confirmation
(Command echo back)
Data
0 (OFF), 1 (ON)
Data
9
'39h'
Advertisement
Table of Contents
