GE Security GE-DSG-8 DSGH-5 User Manual page 16

Chapter 2: Installation
Wall Plate Mounting
To install the Industrial Gigabit Ethernet Switch on the wall, please follow the
instructions described below.
1. Remove the DIN-Rail from the Industrial Gigabit Ethernet Switch; loosen the
screws to remove the DIN-Rail.
2. Place the wall mount plate on the rear panel of the Industrial Gigabit Ethernet
Switch.
3. Use the screws to secure the wall mount plate on the Industrial Gigabit Ethernet
Switch.
4. Use the hook holes at the corners of the wall mount plate to hang the Industrial
Gigabit Ethernet Switch on the wall.
5. To remove the wall mount plate, reverse the steps above.
12 GE-DSG-8 DSGH-5 and 8 Ethernet Switch User Manual