Radio Shack Universal Battery Pack Conditioner/Charger Owner's Manual page 5

23-250.fm Page 5 Friday, August 6, 1999 2:09 PM
Follow these steps to mount this type
of battery pack on the conditioner/
charger.
1. Pull the battery stopper's latch
on the right front of the condi-
tioner/charger, then pull open
the stopper.
(illus)
2. To mount a wide battery pack on
the conditioner/charger, position
the attached battery guide so its
edge faces out.
To mount a narrow battery pack,
position the battery guide so its
edge faces in.
(illus)
3. Place the battery pack on the
conditioner/charger so its con-
tacts overhang, then move the
battery contacts (A and B) up or
down, left or right until they
touch the battery pack's con-
tacts.
(illus)
4. Push down on the battery stop-
per's tab and slide it outward
until it stops (about
make room for the battery pack.
(illus)
5. Close the battery stopper and
make sure the latch locks into
place.
(illus)
3 / inch) to
4
5