Jabra 8110 User Manual page 4

Add New Hardware Wizard - USB Audio Device
11. Next, the
Wizard automatical-
ly installs the USB
Audio Device. The
Add New
Hardware Wizard
indicates that it has
found the USB
Audio Device.
Click Next.
12. The Wizard
prompts you to
search for the best
driver for your
device or select the
driver you want
from a list. Select
Search for the best
driver for your
device.
Click Next.
If the Wizard Cannot Locate the Driver
16. If the Add New Hardware Wizard cannot locate the driver,
insert your Windows Operating System CD-ROM into the CD-
ROM drive. Once inserted, press Back, and check the box for your
CD-ROM drive (usually D). Click Next. Click Finish when the
Wizard is complete.
If the Wizard still does not locate the driver, go to the GN Netcom
website at www.gnnetcom.com/usb or contact GN Netcom
customer service at 1-800-826-4656 for help and additional
information.
Note: Do not unplug the USB connector from the computer while
an application that uses USB audio is running. This could cause a
system crash.
13. Windows
searches for new
drivers in a specific
location. Uncheck
all the boxes.
Click Next.
14. The Wizard
indicates that it is
ready to install the
best driver for this
device. Click Next
to install the driver.
15. Click Finish when the Wizard is complete.
Headsets
The GN8110-USB is designed to work with GN Netcom profes-
sional headsets equipped with a Quick Disconnect (QD) which
mates to the Quick Disconnect jack on the device. Disconnecting
at the Quick Disconnect allows you to walk away from your
computer without removing your headset.
Before using your headset, join the Quick Disconnect to the
mating connector on the GN8110-USB as shown.