BandLuxe P530 Series User Manual page 18

Note: You may be required to reconnect to the device if you
change these settings from the factory default.
User Number Control Select from the drop-down menu the maximum
number of client devices (1-10) allowed to connect to your WLAN.
User List Client devices that are connected to your WLAN are listed in
tabular form, which displays the Device Name, MAC Address and IP.
SSID Network name of your WLAN. It is case sensitive and can not
exceed 32 characters. By default, the SSID is "NTLS_LTE + last 4 digits
of the device's MAC address". The default SSID is also printed on the
network information card.
Wi-Fi On/Off Software option to enable or disable the WLAN function. By
selecting the Off option, you disable WLAN functions. Select On to
re-enable. If you have selected the Off option when connected via WLAN,
use the USB cable to regain access to the web interface. This option does
not affect the Internet connection and does not override the hardware
switch.
To preserve the changes you have made, click Save. To delete the
changes, click Cancel.
Wi-Fi Protected Setup (WPS) is a standard designed for easy setup and
automatic configuration of secure Wi-Fi networks between two WPS
supported devices. If your wireless adapter supports WPS, the WPS
feature can be a user-friendly and simple process to get your WLAN up
and running.
If the client device supports WPS, you can perform the following steps to
connect the client device to your WLAN.
1. Press the WPS button located on the side of the device or click
Connect. This initiates a search for client devices for 120 seconds.
2. Press the WPS button on client device or the software WPS button
on the client device.
If you wish to manually pair with a client device, enter the PIN from the
client device WPS software in WPS PIN and click Submit. The device will
attempt to pair with the client device using WPS.
18