HP Passport 1912nm User Manual page 11

4. To attach the monitor to a mounting fixture, insert four 10mm screws through the holes on the
mounting plate and into the mounting holes on the monitor.
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To
attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long
screws are required. Longer screws must not be used because they may damage the monitor. It
is important to verify that the manufacturer's mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display panel. For best performance, it
is important to use the power and video cables provided with the monitor.
Figure 2-4 Mounting the Monitor
ENWW Preparing the Monitor for Wall-Mounting 5