Empty The Contents Of Micro Rolltalk - "Hard Reset - Abilia Micro Rolltalk User Manual

Empty the contents of Micro Rolltalk – "Hard reset"
If you want to remove all stored content, and installed applications from Micro Rolltalk
you can do a "Hard Reset". To perform a Hard reset (delete everything on the Micro
Rolltalk and put it back to factory settings) do the following:
• Place the pen in the Reset-hole
• Press the round button in front of the device
• Release the pen form the Reset-hole, while still pressing the round button in front of
the device. Press the button until the Windows logo appears.
• The process is completed. Follow the instructions on screen.
You will need to perform the following start-up routine before using the Micro Rolltalk,
if you have deleted the memory (i.e. after a hard reset).
1. Press the screen to start configuring the device.
2. Use the pen to align the screen, press the crosses that appears on the screen
to calibrate.
3. Select settings for the local time. First select the correct time zone.
Set the time by pressing the up / down buttons next to the digits.
Choose the correct date by first pressing the date and then browse the
calendar month at the right appears.
(The correct time settings are especially important when using the functions
for time display and reminders).
4. Skip the configuration of password and e-mail.
5. Press the screen to complete the start-up routine. The device automatically
configures the reaming installation.
6. Make sure that the Regional Settings are set to the right language before
starting to use the SMS functions of the unit. To do this, select
|
Start Settings
the screen, in the event scroll down the screen), and then scroll down to the
correct language in the drop-down list that appears. The machine must be
restarted before the settings take effect. Preform a soft reset.
The machine is now ready to install Rolltalk Designer for Micro Rolltalk, follow the
instructions on page 27
| |
System Regional Settings (this item may be located outside
31