Play Audio Via Bluetooth; Make A Call; Clear The Pairing History - Philips SB2000 User Manual

1
On your device, search for Bluetooth
devices.
2
In the device list, select SB2000.
• If a message prompts for the
permission for Bluetooth connection
with SB2000, confirm it.
• If a password is required, enter 0000
and then confirm.
» The speaker beeps when the
Bluetooth connection is established.
Bluetooth indicator
The LED indicator beside the
indicates the status of Bluetooth connection.
Indicator Bluetooth connection
Blinking blue Connecting or waiting for
connection
Solid blue Connected
Disconnect a device
On your device, disable the Bluetooth
connection with this product.
Note
•
Before connecting another Bluetooth device, disconnect
the current device first.
Reconnect a device
• For a paired Bluetooth device on which
the automatic reconnection is enabled,
this product reconnects with it once it is
detected.
• For a paired Bluetooth device that does
not support the automatic reconnection,
reconnect it with this product manually.
8 EN
button

Play audio via Bluetooth

Note
•
If the connected Bluetooth device supports the
Advanced Audio Distribution Profile (A2DP), you can
listen to tracks that are stored on the device through
the system.
•
If the device also supports the Audio Video Remote
Control Profile (AVRCP), you can control play on this
product.
•
If the connected device does not support the AVRCP,
control play on the connected device.
•
If there is an incoming call on the connected mobile
phone, music play pauses.
Buttons Functions
Start, pause, or resume play.
/ Increase or decrease the
speaker volume.

Make a call

Buttons Functions
Press to answer an incoming call.
Press to end the current call.
Press and hold to reject an incoming
call.
Press twice to dial the last called
number.
Press twice to hold on the current
call and answer another incoming call.
/ Increase or decrease the speaker
volume.

Clear the pairing history

When the product is powered off, press and
hold for 8 seconds.