Table of Contents
Advertisement
4 Use Bluetooth
devices
With this speaker, you can listen to audio from
a player and make a call through Bluetooth.
Note
•
Make sure that no audio input cable is connected to
the AUX socket.
•
Philips does not guarantee the compatibility with all
Bluetooth devices.
•
Before pairing a device with this system, read its user
manual for Bluetooth compatibility.
•
The product can memorize a maximum of 8 paired
devices.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
The operational range between this system and a
Bluetooth device is approximately 10 meters (30 feet).
•
Any obstacle between this system and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
Connect a device
1
On your device, search for Bluetooth
devices.
2
In the device list, select PHILIPS SBT11.
• If a message prompts for the
permission for Bluetooth connection
with PHILIPS SBT11, confirm it.
• If a password is required, enter 0000
and then confirm.
Bluetooth indicator
Indicator
Bluetooth connection
Blinking blue
Connecting or waiting for
connection
Solid blue
Connected
To switch off the Bluetooth indicator
•
Press and hold
for 2 seconds.
To switch on the Bluetooth indicator again
•
Press and hold
Disconnect a device
On your device, disable the Bluetooth
connection with this product.
Reconnect a device
•
For a paired Bluetooth device on which
the automatic reconnection is enabled,
this product reconnects with it once it is
detected.
•
For a paired Bluetooth device that does
not support the automatic reconnection,
reconnect it with this product manually.
Play audio via Bluetooth
Note
•
If the connected Bluetooth device supports the
Advanced Audio Distribution Profile (A2DP), you can
listen to tracks that are stored on the device through
the system.
•
If the device also supports the Audio Video Remote
Control Profile (AVRCP), you can control play on this
product.
•
If the connected device does not support the AVRCP,
control play on the connected device.
Buttons
Functions
Start, pause, or resume play.
Increase or decrease the speaker
volume.
and
simultaneously
for 2 seconds.
EN
6
Advertisement
Table of Contents
