Page 1
THIS DOCUMENT IS THE PROPERTY OF PIONEER CORPORATION AND CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION DEVELOPED BY PIONEER CORPORATION. THIS DOCUMENT SHALL NOT BE DISCLOSED TO OTHERS, OR DUPULICATED, OR USED BY OTHERS EXCEPT AS AUTHORIZED BY PIONEER CORPORATION IN WRITING.
PIONEER CONFIDENTIAL Page 2 CONTENTS 1. Blank Page............................3 2. Features..............................4 3. Name of Parts / Function / Setting....................5 3.1. Front............................5 3.2. Rear............................6 4. Power Supply............................7 4.1. Input Voltage..........................7 4.2. Current and Power Consumption..................7 5. Installation............................8 5.1.
PIONEER CONFIDENTIAL Page 4 Features 2. Features Maximum Write Speed 8X CAV at DVD-R/+R 8X Z-CLV at DVD+RW 6X P-CAV at DVD-R DL/+R DL 6X Z-CLV at DVD-R DL/+R DL, DVD-RW, 5X Z-CLV at DVD-RAM 24X CAV at CD-R 24X Z-CLV at CD-RW...
Notes: The drive corresponds to GBAS. GBAS is “Generic Bezel Attachment Specification” by Dell Computer Corporation. The figure 3-A as above is for Pioneer standard bezel and it is not attached to this drive when shipping. BDC-TD03RS Revision 0.50...
PIONEER CONFIDENTIAL Page 6 Name of Parts / Function / Setting 3.2. Rear Figure 3-B: Rear View DC Input (5) Name Function Device Present 5 V Power 5 V Power Manufacturing Diagnostic (Vendor unique) SATA Interface (6) Name Function Differential Signal Pair from host controller...
PIONEER CONFIDENTIAL Page 7 Power Supply 4. Power Supply 4.1. Input Voltage Normal DC Input Voltage +/- 5 % (Operating) Voltage Allowance - 8% (Start-up) Ripple Voltage Less than200 mVp-p 4.2. Current and Power Consumption Power +5V Current Consumption Conditions...
PIONEER CONFIDENTIAL Page 8 Installation 5. Installation 5.1. Mounting Direction This drive is Horizontal and Vertical Use. Allowance is referring to the following figures. 15deg 15deg Front 15deg 15deg Figure 5-A: Mounting Direction, Horizontal +15deg -35deg Figure 5-B: Mounting Direction, Vertical BDC-TD03RS Revision 0.50...
PIONEER CONFIDENTIAL Page 9 Installation 5.2. Installation Conditions Range of force for the top cover and the bottom case Top Cover Bottom Case Figure 5-C: Top Cover and Bottom Case Force Map BDC-TD03RS Revision 0.50 February 9th, 2010 9 / 25...
Page 10
PIONEER CONFIDENTIAL Page 10 Installation Drive Unit Clearance Overall unit height of the diagonal area in the diagram above is 12.7+/-0.2 (excluding unit bottom shield sheet) Other areas (excluding product label and top metal sheet curling) are 12.7+0.5/-0.2. If force is exerted in areas outside of the range of force (see Range of force), problems may occur with the loading mechanism.
PIONEER CONFIDENTIAL Page 11 Environmental Conditions 6. Environmental Conditions 6.1. Temperature and Humidity Unit Condition Test Items MIN. TYP. MAX Units Note Temperature ºC within ºC/hour deviation Humidity Operating within %/hour Bulb deviation ºC Temp. No condensation Temperature ºC within ºC/hour...
PIONEER CONFIDENTIAL Page 12 Environmental Conditions 6.3. Shock Drive Condition Test Item Test Condition Criteria 19.6 m/s2 {2 G} 0-P during read and play Acceleration 14.7 m/s2 {1.5G} 0-P during No error is found write operation during Operating operation after this test.
PIONEER CONFIDENTIAL Page 18 Specifications 7.8. Access Time / Seek Time Parameter Ave. Unit Note msec Random Average Access Time DVD-RAM msec Random Average Random Seek Time DVD-RAM msec Average Full Stroke Seek Time DVD-RAM Note: The value of “CD” is specified when CD-ROM Mode1 Disc is used.
PIONEER CONFIDENTIAL Page 19 Specifications 7.10. Acoustic Item Spec.(TYP.) Note Without loading operation, at 1m horizontal setting, Sound Pressure Less than 40dB(A) with 0.25 gcm imbalance disc at 5,160rpm. Sequential read and random seek operation. BDC-TD03RS Revision 0.50 February 9th, 2010...
Need help?
Do you have a question about the BDC-TD03RS and is the answer not in the manual?
Questions and answers