Faqs - EchoStar HDS-600RS User Manual

FAQs

If you can't find a solution to a problem here, please visit
www.myechostar.com/support
No lights on HDS-600RS; it doesn't switch on
Check that the mains lead is plugged in to the power socket and the power socket
-
is switched ON.
Try a different power socket.
-
Try a different power lead or check the fuse.
-
No TV picture
Check that the HDS-600RS is plugged in, switched on and has had sufficient time
-
to warm up.
Make sure the HDS-600RS is not in Standby (you can bring the unit out of standby
-
by pressing the standby button on the front of the unit).
- Ensure the AV cable (either HDMI or SCART) is firmly connected to the unit and to
the TV.
Ensure that the antenna cables are firmly connected to the unit and are in good
-
condition.
Ensure that the TV is set up with the HDS-600RS and is not configured to receive
-
input from an external device such as a DVD Player.
Check that the TV is switched on and that the brightness level is set correctly.
-
Try changing channel: the selected channel may be off air.
-
No sound
Ensure the AV cable (either HDMI or SCART) is firmly connected to the unit and to
-
the TV.
Check the volume level of your TV or Audio/Theatre System (if connected).
-
Check that the HDS-600RS, TV or Audio/Theatre System are not set to MUTE.
-
Poor picture or sound quality
Ensure that the satellite dish is installed correctly (away from trees or other
-
obstacles) and is providing a good quality signal (see page 20).
Picture quality may be temporarily affected by bad weather (heavy rain, snow).
-
Check the signal level coming from your dish (see page 20).
If you have poor signal strength you may wish to consider changing the satellite
-
dish for a larger one as this will increase the signal levels received.
Check the LNB for damage as moisture inside the LNB will affect signal strength
-
54