Page 2
The wide blade is provided for your safety. If the provided plug does not fit into your outlet, consult an You must have both an AudioCast Transmitter and an electrician for replacement of the obsolete outlet. AudioCast Receiver to complete your Soundcast...
A blue light will glow on the top of the transmitter indicating you have power. On the back of your AudioCast Transmitter you will find four jacks. One is for the AC/DC Adaptor as illustrated above. You will also see three 3.5 mm mini jacks in a Use the 3.5 mm mini / 3.5 mm mini to connect the...
Page 5
Any speaker systems that are attached to this product must have internal amplifiers in order to play music. If you wish to connect your AudioCast Transmitter to a set of headphones you may do so by inserting the plug into the headphone jack on the back of the AudioCast Transmitter.
Reciever downstairs meter) radius by using the channel selector switch on the back of the unit. All Soundcast products come from Each AudioCast Transmitter can operate up to two the factory with Channel 1 selected. On the back of each AudioCast Receivers.
Page 7
Channel selector, 1, 2, or 3 interference in a residential installation. This equipment generates When you wish to use two Soundcast systems at the and can radiate radio frequency energy and, if not installed and used same time, leave one system on Channel 1 and move in accordance with the instructions, may cause harmful interference to radio communications.
Page 8
Soundcast may be subject to refusal or significant delays. defective item. All products that are replaced will become the property Please ship the authorized return to Soundcast within 15 days of the of Soundcast Systems. Replacement products may be new or issuance of the RMA.
Need help?
Do you have a question about the AudioCast Transmitter and is the answer not in the manual?
Questions and answers