Installing The Driver Software For Windows Millennium; Installing The Driver Software For Windows 2000 - Linksys Instant Wireles Series User Manual

Installing the Driver Software for Windows Millennium

1. Windows Millennium
will automatically identi-
fy the Wireless Network
Access Point, once it is
connected to the PC
via the USB cable, and
prompt you to install the
necessary driver.
2. Select Automatic Search for a better driver (Recommended) and click the
Next button. This will search for the Windows Millennium driver.
3. Windows will now install the driver files. Click the Finish button when com-
pleted. Windows may ask for the driver, which is located at
"D:\WAP11\usbdrv" (where "D" specifies your CD-ROM drive). Click OK.
4. Continue to the Configuring the Wireless Network Access Point section
for software installation now.
10
Downloaded from www.Manualslib.com
Instant Wireless TM
manuals search engine
Series Wireless Network Access Point

Installing the Driver Software for Windows 2000

1. Windows 2000 will automatically identify the Wireless Network Access
Point, once it is connected to the PC via the USB cable, and prompt you to
install the necessary driver. Make sure that the Setup Utility CD is inserted
into your CD-ROM drive and click the Next button on the Found New
Hardware Wizard screen to proceed.
2. Select Search for a suitable driver... and click the Next button. This will
search for the Windows 2000 driver.
11