Installing The Usb Drivers For The Wireless Network Access Point; Installing The Driver Software For Windows 98 - Linksys Instant Wireles Series User Manual

Installing the USB Drivers for the
Wireless Network Access Point

Installing the Driver Software for Windows 98

1. Windows 98 will automatically identify the Wireless Network Access Point,
once it is connected to the PC via the USB cable, and prompt you to install
the necessary driver. Make sure that the Setup Utility CD is inserted into
your CD-ROM drive and click the Next button on the Add New Hardware
Wizard screen to proceed. (When you insert the Setup Utility CD, the instal-
lation may try to run automatically. If it does, exit out of the program and
return here.)
2. Select Search for the best driver... and click the Next button. This will
search for the Windows 98 driver.
8
Downloaded from www.Manualslib.com
Instant Wireless TM
manuals search engine
Series Wireless Network Access Point
3. Windows will now ask you where to search for the driver software. Select
Specify a location and type in the blank field D:\WAP11\WIN9X (where
"D" specifies your CD-ROM). Then, click the Next button.
4. Windows will now search for the driver. After Windows has acknowledged
finding the driver, click the Next button.
5. Windows will now install the driver files. Click the Finish button when com-
pleted.
6. Continue to the Configuring the Wireless Network Access Point section
for software installation.
9