Power Management - Sharp LC-19A35H-BK Operation Manual

Watching TV

Power Management

You can set the TV to automatically power off when no
image is displayed on PC.
Press MENU and the MENU screen displays.
1
Press c / d to select "Power Control", and
2
then press ENTER.
• Power control menu displays.
Press a / b to select "Power Management",
3
and then press ENTER.
Press a / b to select "Mode 1" or "Mode 2",
4
and then press ENTER.
Select desired item
Off
Mode 1
Mode 2
Selected item
Off • No power management
• Factory preset value.
Mode 1 • If no signal inputs for approximately 8
minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 13.)
Mode 2 • If no signal inputs for approximately 8
seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 13.)
NOTE
• If you turn off the power by disconnecting AC cord when
setting "Mode 2" in power management, the TV may not
function properly after turning the power on again. In such
case, press POWER on the remote control unit.
• Pressing POWER on the TV will have the same result.
26
Description