External Audio Player; Troubleshooting - Craig CMA3569 Owner's Manual

AUX IN:
To listening from the external audio player such like MP3 Player, Disc-man ... etc.
1. Slide the Power ON/OFF Switch to ON position to power on the unit. The Blue
Indicator on front panel will light.
2. Connect one end of the supplied Audio Connection Cable to the Line Out; AUX Out
or Phones Jack of the external audio player.
3. Insert other end of the supplied Audio Connection Cable to the AUX IN Jack on the
rear of unit. The unit will turn to AUX IN mode automatically.
4. Plays the music in the connected audio player as usual. (Make sure the volume level
the connected audio player is turned to high level. ( Otherwise, sound is weak. )
of
5. During playback, press the + or
level as desire.
6. When finished listening, slide the Power ON/OFF Switch to OFF position to shut off
the unit.

Troubleshooting:

Can't power on
No sound or sound
weak
– (Volume Up or Down) Buttons to adjust
Built in battery
consumed
Volume of the unit was
set to minimum position
Volume of
paired/connected
device is in low volume
level
5
Recharge the battery.
Increase the volume level by
press the + Button.
Rise the volume level of the
paired BT device or connected
audio player
volume