Selecting A Supported Display Mode - Lenovo LT1423pwC User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
800 x 600
1280 x 720
1280 x 800
1024 x768
1366 x 768
1440 x 900
1600 x 900
configured to a display mode outside the range of this monitor, you may need
to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to 1600 x 900 at 60 Hz, which is the Native Resolution
Display mode.
Refresh rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Chapter 2. Adjusting and using your monitor
2-5