Table of Contents
Advertisement
JC-M102U/M104U
Hardware Installation
3. Connect your audio and microphone to the rear panel of the JC-
M102U/ M104U. The male 3.5mm plug to the audio and microphone
in the console of your JC-M102U/M104U as show below.
4. Attach the power supply to the JC-M102U/ M104U unit and plug the
power supply into a power source. Now you will see the LED for
Port 1 light up, and you will hear a beep. Switch on your Monitor.
9V
Advertisement
Table of Contents
