VTech CS6719 User Manual page 2

-OR-
3. To answer the intercom call, press
• Press , , OFF, or any dialing key on the any dialing key on the destination handset.
handset.
You can now have a private conservation
-OR- before transferring the call.
• Place the handset in the telephone base or 4. From this intercom call, you have the
following options:
charger.
• You can let the destination handset join
NOTE
you on the outside call in a
Do not press and hold /FIND HANDSET for
three-way conversation. Press and hold
more than four seconds. It may lead to handset
INT on the originating handset.
deregistration.
• You can transfer the call. Press OFF, or
Join a call in progress place your handset back in the telephone
base or charger. Your handset displays
You can use up to two system handsets at a
Transferred. The destination handset is
time on a home line call. You can buy additional
then connected to the outside call.
expansion handsets (CS6709) for this telephone
• You can press INT to switch between the
base. You can register up to five handsets to the
outside call (Outside call displays) and the
telephone base.
intercom call (Intercom displays).
• When a handset is on a home call, press
• The destination handset can end the
or on another handset to join the call.
intercom call by pressing OFF, or by
• Press OFF to exit the call. The call continues
placing the handset back in the telephone
until all handsets hang up.
base or charger. The outside call continues
Transfer a call with the original system handset.
While on an outside call, you can transfer the
Answer an incoming call during an
call from one handset to another.
Press MENU on your handset during a call. intercom call
1.
Scroll to Transfer, and then press SELECT. If you receive an incoming call during an
2.
intercom call, there is an alert tone.
3. Use the dialing keys to enter a destination
• To answer a call, press
handset number.
ends automatically.
4. To answer the intercom call, press , , or
• To end the intercom call without answering
any dialing key on the destination handset.
the outside call, press OFF. The intercom call
ends and the telephone continues to ring.
Intercom
Use the intercom features for conversations
between two devices.
Redial list
1. Press INT on your handset when not in use.
2. Use the dialing keys to enter a destination Each handset stores the last 10 telephone
handset number. numbers dialed. When there are already 10
entries, the oldest entry is deleted to make room
3. To answer the intercom call, press , , or
for the new entry.
any dialing key on the destination handset.
4. To end the intercom call, press OFF or place
Review the redial list
the handset back in the telephone base or
charger. 1. Press REDIAL when the handset is not in use.
2. Press , , or REDIAL repeatedly until the
Transfer a call using intercom
desired entry displays.
While on an outside call, you can use the
intercom feature to transfer the call from one
Dial a redial list entry
handset to another.
• Press or to dial.
1. Press INT on your handset during a call.
2. The current call is put on hold. Use the
Delete a redial list entry
dialing keys to enter a destination handset
When the desired redial entry displays, press
number.
DELETE.
ECO mode The display Disconnect the telephone line cord
shows No line. I from your telephone and connect it
cannot hear the to another telephone. If there is no
This power conserving technology reduces power
dial tone. dial tone on that other telephone
consumption for optimal battery performance. The ECO
either, then the telephone line cord
mode activates automatically whenever the handset is
may be defective. Try installing a
synchronized with the telephone base.
new telephone line cord.
If changing telephone line cord
General product care does not help, the wall jack (or the
wiring to this wall jack) may be
defective. Contact your telephone
Taking care of your telephone
service provider.
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
You may be using a new cable
or VoIP service, the existing
Avoid rough treatment
telephone jacks in your home
Place the handset down gently. Save the original
may no longer work. Contact your
packing materials to protect your telephone if you ever
service provider for solutions.
need to ship it.
I accidentally While the handset is not in use,
Avoid water
set my LCD press MENU and then enter
Your telephone can be damaged if it gets wet. Do not
364 to change the handset LCD
use the handset outdoors in the rain, or handle it with language to
wet hands. Do not install the telephone base near a Spanish or language back to English.
sink, bathtub or shower. French, and I
don't know how
Electrical storms
to change it back
Electrical storms can sometimes cause power surges
to English.
harmful to electronic equipment. For your own safety, take
caution when using electrical appliances during storms.
Cleaning your telephone
Limited warranty
Your telephone has a durable plastic casing that should
retain its luster for many years. Clean it only with a
dry non-abrasive cloth. Do not use dampened cloth or What does this limited warranty cover?
cleaning solvents of any kind.
The manufacturer of this VTech Product warrants to
the holder of a valid proof of purchase ("Consumer" or
"you") that the Product and all accessories provided
Frequently asked questions in the sales package ("Product") are free from
defects in material and workmanship, pursuant to the
following terms and conditions, when installed and
Below are the questions most frequently asked about
used normally and in accordance with the Product
the cordless telephone. If you cannot find the answer to
operating instructions. This limited warranty extends
your question, visit our website at
only to the Consumer for Products purchased and
www.vtechphones.com or call 1 (800) 595-9511
used in the United States of America and Canada.
for customer service. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
What will VTech do if the Product is not free from
defects in materials and workmanship during
My telephone Make sure the telephone base is the limited warranty period ("Materially Defective
does not work installed properly, and battery is Product")?
at all. installed and charged correctly.
During the limited warranty period, VTech's authorized
For optimum daily performance,
service representative will repair or replace at VTech's
return the handset to the
option, without charge, a Materially Defective Product. If
telephone base after use.
we repair the Product, we may use new or refurbished
replacement parts. If we choose to replace the Product,
we may replace it with a new or refurbished Product
of the same or similar design. We will retain defective
parts, modules, or equipment. Repair or replacement
of the Product, at VTech's option, is your exclusive
remedy. VTech will return the repaired or replacement
Products to you in working condition. You should expect
the repair or replacement to take approximately 30 days.
3. Use the dialing keys to edit the name, and
, , or Directory
then press SELECT to save.
The phonebook can store up to 50 entries, which
Delete a directory entry:
are shared by all handsets. Each entry may
1. When the desired entry displays, press
consist of a telephone number up to
DELETE.
30 digits, and a name up to 15 characters.
2. When the screen displays Delete contact?,
Add a directory entry
press SELECT.
1. Press MENU when the phone is not in use.
2. Scroll to Directory then press SELECT.
Speed dial
3. Press SELECT again to choose
Add contact.
You can copy up to 9 directory entries into the
4. Enter the number.
speed dial locations (0 and 2-9) so that you can
• Use the dialing keys to enter the number
dial these numbers using fewer keys than usual.
(up to 30 digits).
The speed dial memory locations are stored
5. Press SELECT to move to the name.
in the telephone base and are shared by all
6. Use the dialing keys to enter the name (up to
handsets. Changes made to the speed dial
15 characters). Additional key presses show
entries on one handset apply to all.
other characters of that particular key.
7. Press SELECT to save.
Assign a speed dial entry
While entering numbers and names, you
1. Press MENU when the phone is not in use.
can:
Scroll to Directory, then press SELECT.
2.
• Press DELETE to erase a digit or character.
Scroll to Speed dial, then press SELECT.
3.
• Press and hold DELETE to erase the entire
4. Press
entry.
choose the desired speed dial location.
• Press or to move the cursor to the left
5. Press SELECT. The screen displays Copy
or right.
from DIR... and then the first entry in the
• Press and hold PAUSE to insert a dialing
. The intercom call
directory.
pause (for entering phone numbers only).
6. Scroll to browse to the desired entry.
• Press 0 to add a space (for entering names
-OR-
only).
Use the alphabetical search to find the desired
• Press to add ( appears) or to add
entry.
# ( appears) (for entering phone numbers
only). 7. Press SELECT to save. You hear a
confirmation. The name (up to 12 characters)
Review the directory
appears in the selected speed dial location.
Entries are sorted alphabetically.
1. Press when the phone is not in use. NOTES
2. Scroll to browse through the directory, or If the directory is empty, when you press SELECT in
•
use the dialing keys to start a Step 5, the screen displays Directory empty.
name search (you can enter up to
• If the speed dial location you selected is occupied,
3 characters for the search).
the new directory entry you selected replaces the old
one. Take caution not to replace entries you do not
3. When the desired entry appears, press
or to dial. wish to delete from the speed dial locations.
Dial a directory entry
Reassign a speed dial entry
• When the desired entry appears, press
1. Press MENU when the phone is not in use.
or to dial.
Scroll to Directory, then press SELECT.
2.
Edit a directory entry Scroll to Speed dial, then press SELECT.
3.
1. When the desired entry displays, press
4. Press
SELECT.
choose the speed dial location you want to
reassign.
2. Use the dialing keys to edit the number, and
then press SELECT.
What must you return with the Product to get
How long is the limited warranty period?
warranty service?
The limited warranty period for the Product extends for
ONE (1) YEAR from the date of purchase. If VTech 1. Return the entire original package and contents
repairs or replaces a Materially Defective Product including the Product to the VTech service location
under the terms of this limited warranty, this limited
along with a description of the malfunction or
warranty also applies to the repaired or replacement
difficulty; and
Product for a period of either (a) 90 days from the
2. Include a "valid proof of purchase" (sales receipt)
date the repaired or replacement Product is shipped to
identifying the Product purchased (Product model)
you or (b) the time remaining on the original one-year
and the date of purchase or receipt; and
warranty; whichever is longer.
3. Provide your name, complete and correct mailing
What is not covered by this limited warranty? address, and telephone number.
This limited warranty does not cover:
Other limitations
1. Product that has been subjected to misuse,
This warranty is the complete and exclusive agreement
accident, shipping or other physical damage,
between you and VTech. It supersedes all other
improper installation, abnormal operation or
written or oral communications related to this Product.
handling, neglect, inundation, fire, water or other
VTech provides no other warranties for this Product.
liquid intrusion; or
The warranty exclusively describes all of VTech's
2. Product that has been damaged due to repair,
responsibilities regarding the Product. There are no
alteration or modification by anyone other than an
other express warranties. No one is authorized to
authorized service representative of VTech; or
make modifications to this limited warranty and you
3. Product to the extent that the problem experienced
should not rely on any such modification.
is caused by signal conditions, network reliability,
State/Provincial Law Rights: This warranty gives you
or cable or antenna systems; or
specific legal rights, and you may also have other rights,
4. Product to the extent that the problem is caused
which vary from state to state or province to province.
by use with non-VTech accessories; or
Limitations: Implied warranties, including those of
5. Product whose warranty/quality stickers, product
fitness for a particular purpose and merchantability (an
serial number plates or electronic serial numbers
unwritten warranty that the Product is fit for ordinary
have been removed, altered or rendered illegible; or
use) are limited to one year from the date of purchase.
6. Product purchased, used, serviced, or shipped for
Some states/provinces do not allow limitations on how
repair from outside the United States of America
long an implied warranty lasts, so the above limitation
or Canada, or used for commercial or institutional
may not apply to you. In no event shall VTech be liable
purposes (including but not limited to Products
for any indirect, special, incidental, consequential,
used for rental purposes); or
or similar damages (including, but not limited to lost
7. Product returned without a valid proof of purchase
profits or revenue, inability to use the Product or
(see item 2 on the next page); or
other associated equipment, the cost of substitute
8. Charges for installation or set up, adjustment
equipment, and claims by third parties) resulting from
of customer controls, and installation or repair of
the use of this Product. Some states/provinces do
systems outside the unit.
not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or
How do you get warranty service?
exclusion may not apply to you.
NOTE: Before calling for service, please review the
user's manual - a check of the Product's controls and Please retain your original sales receipt as
features may save you a service call. proof of purchase.
Except as provided by applicable law, you assume the
risk of loss or damage during transit and transportation
and are responsible for delivery or handling charges
incurred in the transport of the Product(s) to the service
location. VTech will return repaired or replaced Product
under this limited warranty. Transportation, delivery
or handling charges are prepaid. VTech assumes no
risk for damage or loss of the Product in transit. If the
Product failure is not covered by this limited warranty,
or proof of purchase does not meet the terms of this
limited warranty, VTech will notify you and will request
that you authorize the cost of repair prior to any further
repair activity. You must pay for the cost of repair and
return shipping costs for the repair of Products that are
not covered by this limited warranty.
5. Press SELECT twice. The screen displays
Reassign SD.
6. Press SELECT. The screen displays Copy
from DIR... and then the first entry of the
directory.
7. Scroll to browse to the desired entry.
-OR-
Use the alphabetical search to find the
desired entry.
8. Press SELECT to save. You hear a
confirmation. The name (up to 12 characters)
appears in the selected speed dial location.
Dial a speed dial number
• Press and hold a dialing key (0 or 2-9) to
dial the number stored in the corresponding
speed dial location.
When the speed dial location is empty, the screen
displays the speed dial list. See Assign a speed
dial entry to add a new entry.
Delete a speed dial entry
Press MENU when the phone is not in use.
1.
or the dialing keys (0 or 2-9) to
or
Scroll to Directory, then press SELECT.
2.
Scroll to Speed dial, then press SELECT.
3.
4. Press or , or use the dialing keys to
choose the desired speed dial location, then
press DELETE. The screen displays Clear
SD #X?
Press SELECT to confirm. You hear a
5.
confirmation tone.
NOTE
Deleting the speed dial entries does not affect the
entries in the directory.
Caller ID
If you subscribe to caller ID service, information
about each caller appears after the first or
second ring. If you answer a call before the caller
information appears on the screen, it will not be
saved in the caller ID log.
The caller ID log stores up to 50 entries. Each
entry has up to 24 digits for the phone number
and 15 characters for the name.
If the telephone number has more that 15 digits,
only the last 15 digits appear. If the name has more
than 15 characters, only the first 15 characters are
or , or use the dialing keys to
shown and saved in the caller ID log.
Technical specifications
Frequency Crystal controlled PLL synthesizer
control
Transmit Handset: 1921.536-1928.448 MHz
freuency
Telephone base: 1921.536-1928.448
MHz
Channels 5
Nominal Maximum power allowed by FCC and
effective IC. Actual operating range may vary
range according to environment conditions
at the time of use.
Power Handset: 2.4V Ni-MH battery
requirements
Telephone base: 6V AC @ 300mA
Charger: 6V AC @ 300mA
Memory Handset directory:
50 memory locations; up to 30 digits
and 15 characters
Handset caller ID log:
50 memory locations; up to 24 digits
and 15 characters
Review a caller ID log entry 4. Scroll to sample each ringer tone, and then
press SELECT to save.
1. Press CID when the phone is not in use.
2. Scroll to browse through the caller ID log. NOTE
When the desired entry appears:
If you turn off the ringer volume, you will not hear ringer
tone samples.
• Press repeatedly to show different
dialing options.
Ringer volume
• Press 1 repeatedly if you need to add or
You can adjust the ringer volume level, or turn
remove 1 in front of the
the ringer off.
phone number.
3. Press or to dial the displayed number. 1. Press MENU when the handset is not in use.
2. Scroll to Ringers, and then press SELECT.
Dial a caller ID log entry
3. Scroll to choose Ringer volume or Cell
• When the desired entry appears, press volume, and then
press SELECT.
or to dial.
4. Scroll to adjust the volume, and then press
Save a caller ID log entry to the directory
SELECT to save.
1. When the desired caller ID log entry
NOTE
displays, press SELECT.
If the handset ringer volume is set to off, that handset
2. Scroll to To Directory then press SELECT. is silenced for all incoming calls except paging tone.
3. Use the dialing keys to modify the number,
Temporary ringer silencing
and then press SELECT.
4. Use the dialing keys to modify the name, When the telephone is ringing, you can
and then press SELECT to save. temporarily silence the ringer of the handset
without disconnecting the call. The next call rings
normally at the preset volume.
Delete a caller ID log entry
Press OFF or MUTE on the handset. The
•
• When the desired caller ID log entry displays,
handset displays and Ringer muted
press DELETE.
briefly.
Delete all caller ID log entries
Quiet mode
Press MENU when the phone is not in
•
You can turn on the quiet mode for a period of
use. Scroll to Caller ID log and then press
time. During this period, all tones (except paging
SELECT. Scroll to Del all calls and then
tone) and call screening are muted. When you
press SELECT twice.
turn on the quiet mode, the answering system
turns on automatically.
Sound settings
1. Press and hold on the handset or
telephone base when idle.
Key tone 2. Use the dialing keys (0-9) to enter the
duration, and then press
You can choose from different ringer tones.
1. Press MENU when the handset is not in use. • To turn off the quiet mode, press and hold
on the handset or telephone base when idle
2. Scroll to Settings, and then press SELECT.
3. Scroll to choose Key tone, and then press
SELECT.
4. Scroll to choose On or Off, and then press
SELECT to save.
Ringer tone
You can choose from different ringer tones.
1. Press MENU when the handset is not in use.
2. Scroll to Ringers, and then press SELECT.
3. Scroll to choose Ringer tone, and then
press SELECT.
Specifications are subject to change without notice.
© 2014 for VTech Communications, Inc.
All rights reserved. 05/14. CS6719_ACIB_V3.0
Document order number: 91-007063-030-100
Expand your telephone system
Add and register a handset
You can add new cordless handsets ( CS6709 ),
DECT 6.0 to your telephone system (purchased
separately).
Your telephone system supports a maximum of
five handsets.
Additional handsets registered to the telephone
system are assigned numbers in the sequential
order. Register each handset with the telephone
base before use.
When first purchased and properly charged,
each expansion handset shows
and ... alternately.
To register HS... see manual
Charge the handset before registering it to the
telephone base.
To register a handset:
• Place the new or non-registered handset in the
telephone base. After about 10 seconds, the
handset shows Registering...
Do not place the handset
in the charger.
The handset shows Registered and you hear a
beep when the registration process completes.
The registration process takes about 90 seconds
to complete.
Deregister all devices
SELECT to save.
To replace a handset or reassign the designated
handset number of a registered handset, you
.
must deregister all handsets and then individually
register each handset.
To deregister all handsets:
1. Press and hold /FIND HANDSET on the
telephone base for about 10 seconds until
the IN USE light on the telephone base
flashes.
2. Immediately press /FIND HANDSET again.
All handsets show To register HS... and ...see
manual alternately when the deregistration
process completes. The deregistration process
takes about 10 seconds to complete.