VTech CS6719 User Manual page 33

I hear other Disconnect the
calls when telephone base from the
using the telephone wall jack. Plug
telephone. in a different telephone. If
you still hear other calls,
the problem is probably
in the wiring or telephone
service. Contact your
telephone service
provider.
I hear noise on Make sure the telephone
the cordless line cord is plugged in
handset and securely.
the keys do not
work.
There is The handset may be out
interference of range. Move it closer
during a to the telephone base.
telephone
If you subscribe to
conversation.
high-speed Internet
My calls fade
service (DSL - digital
out when
subscriber line) through
I am using
your telephone line,
the cordless
you must install a
handset.
DSL filter between the
telephone line cord
and the telephone wall
jack. The filter prevents
noise and caller ID
problems caused by DSL
interference. Contact your
DSL service provider for
more information about
DSL filters.
Appliances or other
cordless telephones
plugged into the
same circuit as the
telephone base can
cause interference. Try
moving the appliance
or telephone base to
another outlet.
The location of your
telephone base can
impact the performance
of your cordless phone.
For better reception,
install the telephone base
in a centralized location
within your home or
office, away from walls
or other obstructions.
In many environments,
elevating the telephone
base improves overall
performance.
The telephone
does not
receive caller
ID or the
telephone does
not show caller
ID during call
waiting.
The display
shows Out of
range or no
pwr at base.
27
Caller ID is a
subscription service.
You must subscribe
to this service from
your telephone service
provider for this
feature to work on your
telephone.
Both your and the
caller's telephone service
providers must use
equipment compatible
with the caller ID service.
The caller may not be
calling from an area
which supports caller ID.
The caller ID information
displays after the first or
second ring.
The handset may be out
of range. Move it closer
to the telephone base.
Make sure the power
cord is securely plugged
into the telephone base.
Use a working electrical
outlet not controlled by a
wall switch.