Samsung WF361 Series User Manual page 33

Water detected over the safe
water level.
Jammed Key.
Motor speed sensor problem.
Temperature sensor problem.
High/Low voltage detected.
Too much suds is detected during
the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will resume operation.
When it finishes washing, the End
and Sd codes will blink in turn.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
Call for service
Call for service
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent, reduce the amount of detergent.
troubleshooting and information codes _33