Edit The Phone List (Full Keypad Model Only) - Motorola CP200XLS User Manual

6 When you hear a dial tone:
Enter the phone
number using the
DTMF keypad (Full
Keypad Model Only).
– or –
L
select a number from
the phone list.
– or –
a. Press and release the preprogrammed
b. Press the key (0 to 9) corresponding to
Note:
40
English
XXXXXXX
M
XXXXXXXX
or to
Speed Dial button.
the number you want to call (Full Keypad
Model Only).
To redial the last number dialed (if not
using Speed Dial), press and release
the PTT button immediately after the
access code is sent. The radio sends
the last number dialed.
7 – or –
If you entered your access code
using the DTMF keypad, press
once to access the last number
dialed; then press and release the
PTT button.
8 Press and release the PTT button, if required
for your radio.
9 When your party answers, press and hold the
PTT button to talk. Hold the radio in a vertical
position with the microphone 1 to 2 inches
(2.5 to 5 cm) away from your mouth. Release
the PTT button when the other party wants to
talk, both parties will need to speak in turn.
10 Disconnect the phone call when the
conversation is completed (see page 39).
EDIT THE PHONE LIST (FULL
KEYPAD MODEL ONLY)
Your radio contains a Phone list that holds up
to 25 phone numbers. You can edit the Phone
list in three ways through your radio's menu:
• Add an entry
L