Partition & Format The Hard Drive; Windows - Eagle Consus W-Series User Manual

4
Partition & Format the Hard Drive
Windows XP/2000/2003
Note: For formatted Hard Drive, proceed to step 2.
1. Click the Start button and click on Control Panel, double-click the
Administrative Tools, and then double-click the Computer
Management.
2. Click the Disk Management under Storage. Your new Hard Drive should
have the right capacity shown. (E.g. figure above Disk 1 is showing
approximately 160GB). Right click the Disk 1, and choose Initialize Disk.
Note: If your Disk 1 is shown as Basic and Online, skip this step.
3. After New Partition Wizard launched, then click Next.
11