Call Tone - Uniden UH044SX Operating Manual

UNIDEN Model uh044sx UHF CB Radio
OPERATION
Room Monitor can be temporarily disabled by pressing
or .If no further operation is performed for 45
CALL
MEM
seconds then the temporary disable mode ends and
Room Monitor mode re-activates.
MENU
1. Press six times.
ENTER
2. Press , to select desired setting.
The 5 Room Monitor levels are from 1 (High sensitivity) to
4 (Low sensitivity) and Off.
3. Press and hold
If using this feature as Baby Monitor please note
it is not a replacement for regularly checking the
safety and security of children.
The operating time is limited to the remaining
charge of the battery and is not suitable for
continuous overnight use.
If there is any input at EXT SP MIC JACK,
Room Monitor automatically turns off.

CALL TONE

Your uh044sx radio is equipped with 5 selectable call
tones that will be transmitted when
momentarily.
1. Press MENU eight times. The current call tone setting
ENTER
flashes.
2. Press , to select desired setting.
The 5 call tones are C1, C2, C3, C4 and C5.
3. Press and hold
Current regulations require calling tones to be
restricted to one transmission per minute. If a
second transmission is attempted within one
minute then an error tone will sound.
to save and exit.
MENU
ENTER
CALL
MEM
to save and exit.
MENU
ENTER
21
is pressed