Getting Your Appliance Ready For Use; How To Use The Refrigerator Compartment - Hotpoint HM450 Instructions For Installation And Use Manual

Hotpoint model hm450 fridge/freezer instructions for installation and use
Table of Contents

Advertisement

GETTING YOUR APPLIANCE READY FOR USE

GETTING YOUR APPLIANCE READY FOR USE
GETTING YOUR APPLIANCE READY FOR USE
GETTING YOUR APPLIANCE READY FOR USE
GETTING YOUR APPLIANCE READY FOR USE
NOTICE
NOTICE
NOTICE
NOTICE
NOTICE
After the appliance has been delivered, stand it in the
After the appliance has been delivered, stand it in the
After the appliance has been delivered, stand it in the
After the appliance has been delivered, stand it in the
After the appliance has been delivered, stand it in the
upright position and wait approximately 3 hours be-
upright position and wait approximately 3 hours be-
upright position and wait approximately 3 hours be-
upright position and wait approximately 3 hours be-
upright position and wait approximately 3 hours be-
fore connecting it to the electrical outlet to guarantee
fore connecting it to the electrical outlet to guarantee
fore connecting it to the electrical outlet to guarantee
fore connecting it to the electrical outlet to guarantee
fore connecting it to the electrical outlet to guarantee
that it operates properly.
that it operates properly.
that it operates properly.
that it operates properly.
that it operates properly.
Before placing foodstuffs in the refrigerator or freezer, clean
the interior well with warm water and baking soda.

How to use the refrigerator compartment

How to use the refrigerator compartment
How to use the refrigerator compartment
How to use the refrigerator compartment
How to use the refrigerator compartment
The temperature control automatically regulates the
temperature inside the appliance
1 1 1 1 1 = minimum cold temperature
5 5 5 5 5 = maximum cold temperature
It is recommended that a medium setting be used.
To increase the amount of space, optimize arrangement and
improve appearance, this appliance has a "cooling area"
located within the back panel of the refrigerator compart-
ment. When the appliance is operating, this panel may be
covered with frost or droplets of water depending on whether
the compressor is operating or not.
The refrigerator compartment of your appliance is equipped
A.I.R. System
A.I.R. System
with "A.I.R. System
A.I.R. System" (Advanced Integrated Refrigeration)
A.I.R. System
which makes it possible to achieve optimal food storage while
simplifying the use of the refrigerator, thanks to the following
features:
-
Fast temperature reset, after the doors have been
opened, the internal temperatures return to optimal levels
faster, improving food storage.
-
More uniform temperature distribution, this makes it
possible to place any type of food on any shelf.
-
Higher humidity level, this allows you to store food
longer.
-
Please follow our instructions carefully on maximum
storage time, any food, even the freshest will not remain ed-
ible for any extended amount of time.
-
Contrary to popular belief, cooked foods do not store
any longer than raw food.
-
Do not place fluids in containers without covering them,
this will lead to an increase in the level of moisture within the
refrigerator, causing the formation of frost.
-
Be careful not to place containers (plastic or glass), food
or other items in direct contact with the cooling area of the
interior back wall of the refrigerator. This could harm the
food, increase energy consumption and facilitate the forma-
tion of condensate (on food, containers, etc.).
GB
After plugging in an switching on at the socket, make sure
the light is on inside the refrigerator compartment.
Then turn the temperature control (A)
After a few hours, you can place fresh food inside the
refrigerator and frozen food inside the freezer.
Do not be concerned about this! The refrigerator is operat-
ing normally.
If the temperature control is positioned on higher settings
while the refrigerator is heavily filled and the ambient tem-
perature high, the appliance may run continuously, resulting
in the formation of frost on the back cooling area. This will
lead to an increase in energy consumption.
To avoid this situation, just turn the temperature
To avoid this situation, just turn the temperature
To avoid this situation, just turn the temperature
To avoid this situation, just turn the temperature
To avoid this situation, just turn the temperature
control to a lower setting so that the appliance
control to a lower setting so that the appliance
control to a lower setting so that the appliance
control to a lower setting so that the appliance
control to a lower setting so that the appliance
defrosts automatically.
defrosts automatically.
defrosts automatically.
defrosts automatically.
defrosts automatically.
B
A
Hotter air is drawn in (B above). This air is cooled
when it comes into contact with the refrigeration
panel (A above).
6
(A) to the 3 3 3 3 3 setting.
(A)
(A)
(A)
B
B
A

Advertisement

Table of Contents
loading

Table of Contents