Table of Contents
Advertisement
E142551
6. Block the diagonally opposite wheel.
7. Loosen each wheel lug nut one-half turn
counterclockwise, but do not remove
them until the wheel is raised off the
ground.
Note: Jack at the specified locations to avoid
damage to the vehicle.
8. The vehicle jacking points are shown
here, and are depicted on the yellow
warning label on the jack.
MKC (TME), enUSA
Wheels and Tires
E145908
9. Small arrow-shaped marks on the sills
show the location of the jacking points.
E162190
10.
Remove the lug nuts with the lug
wrench.
331
Note: If equipped with full wheel covers with
exposed wheel nuts, remove the wheel nuts
prior to removing the wheel cover or damage
to the wheel cover may occur.
11.
Replace the flat tire with the spare tire,
making sure the valve stem is facing
outward. Reinstall the lug nuts until the
wheel is snug against the hub. Do not
fully tighten the lug nuts until the wheel
has been lowered.
12.
Lower the wheel by turning the jack
handle counterclockwise.
1
3
5
2
E75442
4
Advertisement
Table of Contents
