00/05/22 10:33:20 31S84630_284
Replacing a High-mount Brake
Light Bulb
1.
Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
2.
Remove the burned-out bulb by
pulling it straight out of the socket.
3.
Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
Replacing a Rear License Bulb
1.
Remove the license light assembly
by carefully prying on the left
edge of the lens with a flat-tip
screwdriver and pulling the
assembly out.
B
B
U
U
L
L
B
B
2.
Remove the lens from the bulb
holder by pulling the lens while
squeezing the tabs on both sides
of the holder.
CONTINUED
Maintenance
Lights
281