Table of Contents
Advertisement
Instructions for use
GB
English,1
BHWDD 74
!
This symbol reminds you to read this instruction manual.
Contents
Installation, 2-3-4-5-6-7
Connecting the electricity and water supplies
Cutting off the water or electricity supply
Detergent dispenser drawer
Troubleshooting, 15-16
Assistance, 17-18
WASHER DRYER
1
GB
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Hotpoint BHWDD 74
Summary of Contents for Hotpoint BHWDD 74
-
Page 1: Table Of Contents
Cutting off the water or electricity supply Cleaning the washer dryer Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance BHWDD 74 Cleaning the pump Checking the water inlet hose Precautions and tips, 9 General safety... -
Page 2: Installation
Installation ! Keep this instruction manual in a safe place for 2. If the floor is not perfectly level, compensate future reference. Should the appliance be sold, tran- for any unevenness by tightening or loosening sferred or moved, make sure the instruction manual the adjustable front feet (see figure);... -
Page 3: Connecting The Drain Hose
Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate fixed on Connect the drain the machine. hose, without bending it, to a draining duct or • the socket is compatible with the washing a wall drain situated machine’s plug. -
Page 4: The First Wash Cycle
As the colours of the wires in the lead may not ! The power supply cable must only be repla- correspond with the coloured markings iden- ced by an authorised serviceman. tifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &... -
Page 5: Technical Data
Technical data Model BHWDD 74 width 59,5 cm Dimensions height 81,5 cm depth 54,5 cm from 1 to 7 kg for the wash programme Capacity from 1 to 5 kg for the drying programme please refer to the technical Electrical... -
Page 6: Instructions For The Fitter
Instructions for the fitter Door Mounting Accessories (Fig. 1-2-3-4-5). Mounting the wooden panel onto the door and inserting the machine into cabinets: In the case where the machine must be shipped for final installation after the wooden panel has been mounted, we suggest leaving it in its ori- ginal packaging. - Page 7 Using the Drilling Template. - To trace the positions of the holes on the left- hand side of the panel, align the drilling template to the top left side of the panel using the lines traced on the extremities as a reference. - To trace the positions of the holes on the right- hand side of the panel, align the drilling template to the top right side of the panel.
-
Page 8: Care And Maintenance
Care and maintenance Cutting off the water and electri- To access the pre-chamber: city supplies 1. unscrew the lid by rotating it anti- • Turn off the water tap after every wash cycle. clockwise (see figu- This will limit wear on the hydraulic system re): a little water may inside the washer dryer and help to prevent trickle out. -
Page 9: Precautions And Tips
Precautions and tips • During the drying phase, the door tends to get quite hot. This washer dryer was designed and constructed in ac- • Do not use the appliance to dry clothes that have been cordance with international safety regulations. The following washed with flammable solvents (e.g. -
Page 10: Description Of The Washer Dryer
Description of the washer dryer CONTROL PANEL Control panel LOCK button ON/OFF DRYING SPIN SPEED button Button Button DISPLAY MEMORY Button WASH CYCLE FUNCTION START/PAUSE SELECTOR buttons button with indicator DELAY Detergent dispenser drawer Buttons light TIMER Button TEMPERATURE Button Detergent dispenser drawer: used to dispense CONTROL PANEL LOCK button : to activate the control... -
Page 11: Display
Display The display is useful when programming the machine and provides a great deal of information. The upper two strings A and B are used to display the selected wash cycle or the type of drying selected, the current wash cycle phase (the selected dryness level or drying time) and all the indications relating to the progress status of the cycle. -
Page 12: How To Run A Wash Cycle Or A Drying Cycle
How to run a wash cycle or a drying cycle Drying only 1. SWITCH THE MACHINE ON. Press the button; the text Use the cycle selector knob to select a drying cycle ( ) in WELCOME will appear on the display and the START/PAUSE accordance with the type of fabric. -
Page 13: Wash Cycles And Functions
Wash cycles and functions Table of wash cycles Detergents Max. Max. Max. Cycle Description of the wash cycle speed Drying load temp. (°C) duration (rpm) Fabric (kg) Wash softener CLEAN Plus Anti Stain 40° 1400 60° Cottons (1) (1nd press of the button): heavily soiled whites and delicate colours. 1400 ... -
Page 14: Detergents And Laundry
1 kg of cotton garments --> 180 min The degree of dryness depends on the load and fabric composition. Wool: the wool wash cycle on this Hotpoint machine has Do not pour detergent into the middle compartment (*). been tested and approved by The Woolmark Company Detergent should only be poured into the compartment 1. -
Page 15: Troubleshooting
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •... - Page 16 The machine vibrates a lot during • The feet have not been adjusted, enabling the machine to rock. the spin cycle. • New Installation - Either the Transit Bolts including the plastic spacers, or the Polystyrene Packaging have not been removed when installing the machine. •...
-
Page 17: Assistance
OR NON-DOMESTIC PREMISES. 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. -
Page 18: After Sales Service
Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk Appliance Registration We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us. UK: 08448 24 24 24 Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk... - Page 20 195107786.00 10/2012 - Xerox Fabriano...