Table of Contents
Advertisement
3.
To adjust force that will be exerted on the fastener to drive it deeper into the
work piece, use the Depth Adjustment Knob located at the top of the Staple
Gun-see Figure 3. Turn the Depth Adjustment Knob clockwise to increase
the force to drive the fastener, and counterclockwise for less force driving the
fastener.
read the entire iMpOrtant saFety inFOrMatiOn section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
1.
Push the End Clip forward and down to release the Staple Channel latch. Pull
out the Staple Channel-see Figure 1.
2.
Insert a full strip of fasteners into the Staple Channel. Push the Staple Channel
back into the Staple Gun Body (1). Make certain that it is pushed all the way
back into place before operating the Staple Gun.
3.
Determine whether or not the object being stapled will necessitate extra force
from the Staple Gun. This will depend primarily on the thickness of the item be-
ing stapled. For instance, a large pad of papers will need more force than one
or two sheets being stapled together.
4.
Set the Depth Adjustment Knob (1) accordingly.
5.
Place the item to be stapled below the Driver located on the front of the Staple
Gun.
6.
Grasp the Staple Gun with your fingers inserted into the opening in the Hous-
ing (8) and your palm resting on the Handle (2). Squeeze and pull down on the
Handle (2) to fire a fastener.
7.
Test the Staple Gun using a scrap work piece. Make certain that you have the
Depth Adjustment Knob (1) set correctly, and that the fasteners are placed as
you desire.
SKU 96755
Depth Adjustment
Knob (1)
Operating instructiOns
general operating instructions
For technical questions, please call 1-800-444-3353.
Figure 3
Page 6
Advertisement
Table of Contents
