HP ProLiant DL360 Generation 5 (G5) Quickspecs page 10

QuickSpecs
Standard Features
Rack Airflow Rack Airflow Rack Airflow Rack Airflow Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets
Requirements Requirements Requirements Requirements The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: CAUTION: CAUTION: CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
CAUTION: CAUTION: CAUTION: CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD NOTE: NOTE:
provided with the server, or to the server documentation located in the Support section at the following
URL: http://h18000.www1.hp.com/products/servers/proliantdl360/index.html.
Rack Kit Rack Kit Rack Kit Rack Kit The HP ProLiant DL360 quick deploy rail system provides tool-free support for racks with square or
round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series) with an adjustment
range to fit a rack depth of 21.25" to 37.75".
Rack Kit Rack Kit Rack Kit Rack Kit The HP ProLiant DL360 quick deploy rail system provides tool-free support for racks with square or
round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series) with an adjustment
range to fit a rack depth of 21.25" to 37.75".
Telco Rack Support Telco Rack Support Telco Rack Support Telco Rack Support HP ProLiant DL360 G5 Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit
from Rack Solutions (http://www.racksolutions.com/hp/)
Factory Express Portfolio Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP
Factory Express Portfolio Factory Express Portfolio
for Servers and Storage for Servers and Storage for Servers and Storage for Servers and Storage servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your
sales representative or go to http://www.hp.com/go/factory-express.
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must
be a minimum of 2.75 inches (7 cm).
DA - 12476 North America — Version 27 — September 10, 2007
HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5)
Page 10