Acesonic KOD-3000 User Manual page 34

No sound
 Inspect the KOD-3000 to confirm it is connect to audio equipment and that the audio equipment
or TV is connected to the player.
 Check that the volume levels on the TV and audio equipment are audible.
 Check the cables connecting the player to audio equipment or TV.
 The digital signal is prohibited for some discs.
 The PAUSE mode is engaged.
Distorted sound
 Check connections on the KOD-3000 and audio equipment or TV.
 Check input and volume settings on the audio equipment or TV.
 The connection is made to the amplifier's PHONO connection. Try connecting to a LINE in
connection instead.
No picture
 Check the connections between the TV and/or audio equipment and the KOD-3000.
 Check the TV to see if its on the correct input or channel to view the player.
Screen is black and white, wavey, or contains static
 The unit is in the wrong video mode
Distorted picture
 Check connections between the TV and the KOD-3000.
 Check the TV to see if its on the correct input or channel to view the player.
 Inspect the RCA or HDMI cable.
No power
 Check to see that the AC power cord is plugged into the wall and the player.
No microphone volume
 Check microphone connection.
 The microphone is turned off. Many microphones have an on/off switch.
 Set the microphone volume in the microphone menu that is accessed via the remote control.
 The unit is not correctly connected to an amplifier or TV.
There is microphone feedback and screeching
 The microphone is too close to the speakers. Move the microphone further away or lower the
volume of the microphone input.
Remote won't work
 Ensure that there is a clear path between the KOD-3000 and the remote control or decrease the
angle between the remote control and the sensor.
 Replace the batteries.
 Move the remote control closer to the sensor.
 The batteries are incorrectly positioned in the remote. Remove and reseat the batteries.
34