Connecting The Raid System To Acomputer - Sabio DM4 User Manual

CONNECTING THE RAID SYSTEM TO A
COMPUTER
Complete the following steps to connect the RAID System to a host computer.
The RAID System should only be connected to a host computer via one
interface. Connection of the system to a computer via two or more interfaces
simultaneously is not recommended.
1. Connect the AC/DC power adapter.
2. Insert both ends of the USB 2.0, eSATA, FireWire 400, or Fire Wire 800
cable(s) into the corresponding port of the RAID System and the host.
It is highly recommended to select only one interface to do data
transfer.
16