CHANGING THE REVERSIBLE DOOR
CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you
during the door reversal process.
•
Remove the top hinge cover. (See Fig. 1)
•
Using Phillips Head Screwdriver, loosen and remove the
screws holding the top hinge in place.
•
Remove top hinge and carefully lift off the
freezer door.
•
Remove the screw hole plugs from the
opposite side and insert the plugs in the
screw hole openings of the just removed
.
screws.
•
Open refrigerator door and unscrew two
screws from the center hinge bracket
while holding the open door in place.
(See Fig. 2)
•
Remove bracket and lift off refrigerator door.
•
While doors are removed unscrew the door
stoppers and re-insert on opposite side of
door. (See Fig. 3)
•
Remove the screw hole plugs from the
opposite side and insert the plugs in the
screw hole openings of the just removed
screws.
•
Remove any loose items in the refrigerator
and carefully tilt refrigerator and lean against
wall. Remove both leveling legs and place
in a secure area.
•
Loosen the screws holding the lower hinge
bracket to the refrigerator door and remove
screws and bracket. Remove leveling leg.
•
Remove screws from the other side and
insert in the previously removed screw
holes. Remove leveling leg.
•
Remove door pin by turning counter clockwise
and re-insert to the underside of the bracket
and tighten.
•
Align bracket and insert 2 remaining
screws into the holes provided. Tighten
all the way. Replace leveling legs and
place refrigerator in upright position.
•
Replace washers and cap over pin. Align hole to
the refrigerator door with the door pin and gently
push down until firm.
•
Insert pin from center hinge bracket into
refrigerator door hole and align center hinge
bracket holes to the screw holes in the cabinet.
Fig. 1
w
6
Fig. 2
Fig. 3