Altec Lansing INMOTION IM600 User Manual page 3

M
IN OTION I
D S
IGITAL PEAKER
Thank you for purchasing this Altec Lansing product.
For generations, Altec Lansing has been first in audio
innovation. Today, our line of powered speakers has
received more performance awards than any other
brand. In all kinds of environments, in every price
range, Altec Lansing offers sound of distinction —
giving even the most demanding customers the audio
enjoyment they seek. Just listen to this!
Box Contents
• inMotion iM600 mobile speaker system
• Wireless remote
• Power supply
• User's guide and quick connect instructions
Made for:
• iPod
• iPod nano
• iPod mini
Placing the Motion
IN
Open the inMotion iM600 by pressing the button on
the front of the speaker system. Position the inMotion
iM600 on a level surface, preferably close to you (within
three feet).
Assembling the Motion
IN
Dock your iPod by sliding your iPod on top of the iM600
docking station. If necessary, first install the docking
adapter that came with your iPod. While the docking
adapter is not required for proper functioning of your
iPod and iM600, it will provide a better fit.
Note: Alternate audio sources — such as non-dockable
iPods, CD players, MP3 players, portable DVD players,
and laptops — can also be connected to the inMotion
iM600. For more information, see the "Connecting to
alternate audio source" section.
Power
Use one of the following two options to power your
inMotion iM600:
AC (Wall outlet) Power
Insert the barrel connector from the power supply into
the DC connector on the rear of the inMotion iM600.
After this connection is made, insert the power supply
into a wall outlet.
M600
S P
YSTEM FOR I OD
M600
I
M600
I
DC (Battery) Power
The inMotion iM600 features a built-in rechargeable
Lithium-ion battery.
®
Charging time
Continuous Playing Time
Charging the rechargeable battery:
The battery should be fully charged before initial use.
To recharge the battery, insert the barrel connector
from the power supply into the DC connector on the
rear of the inMotion iM600. After this connection is
made, insert the power supply into a wall outlet. The
indicator light turns on. When the battery is fully
recharged, the indicator light turns off.
When the battery icon on the LCD screen displays a
single segment the battery should be recharged.
When the icon starts flashing, the iM600 is about to
shut down.
Warning: During the recharging process it is typical for
the battery to become warm. To be safe, keep
flammable materials away from the inMotion iM600.
Note: To conserve battery power, reduce the inMotion
iM600 volume level.
Disconnecting the rechargeable battery:
1. Unplug the inMotion iM600 from the wall outlet.
2. Open the inMotion iM600 by pressing the button on
the front of the speaker system.
3. Remove the rechargeable battery compartment cover
by removing the 2 screws.
4. Unplug the battery and remove it.
Start Playing
1. Turn on your iPod.
2. Turn on the inMotion iM600 by pushing the
button. The indicator light turns on.
3. Press the [Source] button until "iPod" is displayed on
the LCD screen.
Note: To avoid hearing a popping sound when you turn
on your inMotion iM600, always turn on your audio
source first.
Power Off
Turn off the inMotion iM600 by pushing the
button. The indicator light shuts off.
Auto Shut-down
During battery-only operation the inMotion iM600
automatically shuts down if no audio is detected for
four minutes. Press the
iM600 back on.
NOTE: The Auto Shut-down feature is active during
battery-only operation. If the AC wall adapter is used,
the inMotion iM600 will remain on until the
button is pushed and the indicator light shuts off.
Note: The Auto Shut-down feature will not work when
the inMotion iM600 is in the FM radio mode.
3
up to 3 hours
up to 7.5 hours
button to turn the inMotion