AKG DMM 6 User Instructions page 65

NOTE
DMM 6
The value has been transferred to the selected channels.
Copying all values
1) Press the rotary knob whose values are to be copied and then immediately press the
rotary knob up to which the copy process is to be performed.
2) Hold down the two rotary knobs (approx. 8 seconds) until you hear a beep-beep and the
affected LED rings flash briefly.
All values have been transferred to the selected channels.
The copy process can be performed in both directions. ("IN 1" to "IN 6" and "IN 6" to "IN 1")
Figure 54: Select the rotary knob (source)
Figure 55: Define the copy range (target)
Figure 56: Hold down the rotary knobs
Figure 57: Copy process complete
Operation
65