AKG DMM 6 User Instructions page 62

Operation
62
ROUTING TO OUT
Figure 48: ROUTING TO OUT function
All the input channels can be controlled in the "ROUTING TO OUT" mode.
Figure 49: Adjustment range for the function
The function for the relevant channel is switched on by turning the rotary knob in the
clockwise direction (entire LED ring is illuminated). Turning the rotary knob counter-clockwise
switches the function off (only one LED is illuminated).
Pressing the rotary knob also switches the function on or off.
NOTE
Switching this on sets the input channel to the OUT master bus.
DMM 6