Troy-Bilt 060 series Operator's Manual
  1. Manuals
  2. Brands
  3. Troy-Bilt Manuals
  4. Chippers/Shredders
  5. 060 series
  6. Operator's manual

Troy-Bilt 060 series Operator's Manual

Yard vacuum/chipper/shredder with vacuum/hose
Hide thumbs Also See for 060 series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operator's Manual
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
Safety • Assembly • Operation • Maintenance • Troubleshooting • Parts Lists • Warranty
OPERATOR'S MANUAL
Yard Vacuum/Chipper/Shredder with Vacuum/Hose
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).
If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law
(Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester
for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131 Cleveland,
Ohio 44136-0019.
PRINTED IN U.S.A.
Model Series 060
IMPORTANT
TROY BILT LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
www.mymowerparts.com
www.mymowerparts.com
FORM NO. 769-00835C
5/24/2006

Advertisement

Table of Contents
loading

Related Manuals for Troy-Bilt 060 series

Summary of Contents for Troy-Bilt 060 series

  • Page 1 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Safety • Assembly • Operation • Maintenance • Troubleshooting • Parts Lists • Warranty OPERATOR’S MANUAL Yard Vacuum/Chipper/Shredder with Vacuum/Hose Model Series 060 IMPORTANT READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush- covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).

  • Page 2: Table Of Contents

    You can locate the model plate by standing behind the unit and looking down at the frame below the engine. This information will be necessary to use the manufacturer’s web TROY-BILT LLC site and/or obtain assistance from the Customer Support P. O. BOX 3 6 1 1 3 1 Department or an authorized service dealer.

  • Page 3: Safety Labels

    For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Safety Labels DANGER TO AVOID SERIOUS INJURY • READ OPERATOR'S MANUAL. • KEEP HANDS OUT OF INLET AND DISCHARGE OPENINGS WHILE MACHINE IS RUNNING. ROTATING BLADES ARE INSIDE . WARNING •...

  • Page 4: Safe Operation Practices

    For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 WARNING: Engine Exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm. DANGER: This machine was built to be operated according to the rules for safe operation in this manual.
  • Page 5 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Operation Maintenance & Storage 1. Do not put hands and feet near rotating parts or in the 1. Never tamper with safety devices. Check their proper feeding chambers and discharge opening. Contact with the operation regularly.

  • Page 6: Setting Up Your Yard Vacuum

    NOTE: This Operators Manual covers a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be applicable to all models. Troy-bilt reserves the right Wing Nut to change product specifications, designs and equipment Upper Hose without notice and without incurring obligation.

  • Page 7: Attaching The Handle

    For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Attaching The Handle 1. Remove the hairpin clips from the handle brackets and remove the carriage screws and wing nuts from the lower handle. a. Place the bottom holes in lower handle over the pins on the handle brackets and secure with hairpin clips.
  • Page 8 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Attaching The Hose Assembly 5. a. Slide hose adapter of hose assembly into the base adapter located on the left front of the Yard Vacuum. See Figure 3-5. b.
  • Page 9 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Attaching The Blower Chute (If Equipped) NOTE: The bag must be removed before installing the blower chute. 8. a. Grasp blower chute with one hand and slide locking rod on mounting bracket with other hand toward Setting Up engine.

  • Page 10: Operating Your Yard Vacuum

    For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Know Your Yard Vacuum Starter Handle Operating Your Yard Vacuum Bag Handle Oil Fill Gasoline Fill Hose Handle Hose Assembly Chipper Chute WARNING Nozzle/Hose Vac Lever Nozzle The operation of any chipper shred- Nozzle Height der can result in...

  • Page 11: Starting Engine

    For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Starting Engine Hose Assembly Used as an alternative to the nozzle to vacuum yard 1. Attach spark plug wire to spark plug. Make certain waste such as leaves or pine needles in hard to reach the metal cap on the end of the spark plug is places.
  • Page 12 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 To Empty Bag 1. a. Unhook bag straps from the lower handle. b. Unsnap bag clip from the top of lower handle. See Figure 4-2. c. Grasp bag handle with one hand and pull lock rod on mounting bracket with other hand toward engine to release.
  • Page 13 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Yard waste such as leaves and pine needles can be vacuumed up through the nozzle for shredding. After material has been shredded by the flail blades on the impeller assembly, it will be discharged into catcher bag or through blower chute.

  • Page 14: Maintaining Your Yard Vacuum

    For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 4. Nozzle/Hose Vac Lever: Lubricate the nozzle/hose vac lever on top of nozzle once a season with light oil. Refer to Figure 4-1. 5. Engine: Follow the separate engine manual packed with your unit for lubrication instructions.
  • Page 15 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 3. Remove the front hubcaps, flange lock nuts, front wheels, and wave washers that attach to the pivot arm Front Support Brace and Lock Nut assemblies. See Figure 5-3. Pivot Arm Assembly 4.

  • Page 16: Troubleshooting

    For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Problem Cause Remedy 1. Throttle lever not in correct starting 1. Move throttle lever to FAST or Engine fails to start position. START position. 2. Spark plug wire disconnected. 2.
  • Page 17 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 NOTES: Use this page to make notes and write down important information. For parts and/or accessories please call 1-866-840-6483, or 1-330-558-7220. www.troybilt.com www.mymowerparts.com www.mymowerparts.com...
  • Page 18 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Model Series 060 www.mymowerparts.com www.mymowerparts.com...

  • Page 19: Parts List

    For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Ref. Part No. Description Ref. Part No. Description Parts List 736-0451 Saddle Washer,.320 x.93 710-3288 Hex Cap Screw 1/4-20 x 2.625 749-04172 Upper Handle 723-0295 Adjustment Clamp 720-0279 Knob 749-1270 Nozzle Handle...
  • Page 20 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Model Series 060 www.mymowerparts.com www.mymowerparts.com...
  • Page 21 For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983 Ref. Part No. Description Ref. Part No. Description Parts List 664-0083 Bag Assembly 732-1151A Nozzle Door Torsion Spring 681-0154 Screen Assembly 731-2294A Nozzle Door 710-1054 Hex Screw 5/16-24 x 1.0 764-0632A Bag 781-0490 Chipper Blade...
  • Page 22 For Parts Call 606-678-9623 or 606-561-4983 MANUFACTURER’S LIMITED WARRANTY FOR The limited warranty set forth below is given by Troy-Bilt LLC with respect deck adjustments, and normal deterioration of the exterior finish to new merchandise purchased and used in the United States and/or its due to use or exposure.

Table of Contents