Installing the hard disk
New hard disks are delivered with a shock absorber kit, which is either already attached to the hard
disk, or else you must attach it.
►
If necessary, attach the shock absorber kit to the underside of the new hard disk.
2
1
Mounting the cover
2
1
2
2
A26391-K202-Z120-1-7619, edition 2
Removing and installing components during servicing
►
Plug the hard disk connector to the hard
disk (1).
►
Carefully put the hard disk into the hard
disk compartment (2).
►
Position the cover on its slot in the direction
of the arrow (1).
►
Fasten the cover with the screws (2).
►
Install the battery (see "Inserting battery").
►
Turn the notebook over and place it on a
flat surface.
►
Reconnect the cables that you
disconnected before.
49