D-Link DFL-260E Quick Installation Manual page 5

Using the WebUI
To use the WebUI, the workstation from which you
are managing the device must initially be on the
same subnetwork as the device.
Browser
Microsoft Internet
Explorer
Mozilla Firefox
Netscape
Navigator
Table 4. Browser Compatibility
To access the device with the WebUI:
Step 1
Connect your workstation on the LAN1.
Step 2
Ensure your workstation is configured with a static
IP address in the 192.168.10.0/24 subnet.
Note:
Disable pop-up blocking software or add the
management IP address
your pop-up blocker's allow list.
Step 3
Launch your browser; enter the IP address for the
LAN1 interface. (The factory default IP address is
https://192.168.10.1), then press Enter.
Figure 6. Browser Address
Note:
DFL-260E/860E allows either HTTP or a
secure HTTPS connections from any management
host. However, for security reasons, only a secure
HTTPS connection is allowed by default. For more
information about configuring connections settings,
please refer to the Firewall User Manual.
Version
6.0 or higher
1.0 or higher
8.0 or higher
https://192.168.10.1 to
Step 4
Log into the NetDefend Firewall web interface. The
default login information is:
Username: admin
Password: admin
Figure 7. Authentication Message
Note:
The Language drop-down menu allows
you to select a language for the WebUI. By
factory default, NetDefend Firewall only includes
English. You may upload specific language files
from within the WebUI for additional language
support. Currently, Japanese, Russian, Simplified
Chinese, and Traditional Chinese language files
are available.
Using a Console Connection (RJ-45)
The NetDefend Firewall provides an RJ-45
console port that supports a connection to a
computer or console terminal for monitoring and
configuring the device. This port uses a female
DB-9 connector, implemented as a data
communication terminal equipment (DCE)
connection.
To use the console port connection, you need the
following equipment:
1. A terminal or a computer with both a serial
port and the ability to emulate a terminal.
2. A RJ-45-to-DB9 RS-232 cable with
female connector. (included in the
package)
3. If your Laptop or PC does not have a RS-232
connector, an converter is required.
Note:
DFL-260E/860E does not come with an
RS-232 converter
5