Table of Contents
Advertisement
F
OILING MACHINE
Use only a good sewing machine oil, do not use any common household oils.
Your machine should be oiled occasionally to keep it operating smoothly.
How often
depends on the amount of sewing you do. Once a month oil your machine thoroughly as
indicated by the arrows on illustrations, specifically those point marked in red on your
machine.
Place a single drop to avoid over oiling.
CLEANING AND OILING 1
SHUTTLE AREA
The stitch forming mechanism
occash
ly becomes clogged with loose thr
and lint.
This will interfere with
efficient
operation
of
the
maci
Cleaning and removal of the lint
safeguard the performance.
To remove the shuttle assembly, pro
as follows:
1. Turn hand wheel until the rn
reaches its highest position. Tilt
back on its hinges.
2. Remove bobbin case (A).
3. Turn the two shuttle race cover cli
(0
outward and remove the shi
race cover (C) and the shuttle I
(El and the lint cleaner (0).
4. Clean the shuttle race, the shuttle
shuttle race cover by removinl
threads, lint, etc.
When the cleaning has been completed, proceed as follows to replace the shuttle assert
1. Turn hand wheel until the needle reaches its highest position.
2. Place lint cleaner (0) to shuttle driver and shuttle body (El in race (F) against
shi
driver and adjust into position.
3. Replace shuttle race cover (C), fitting pin at lower edge into notch, and lock
position with shuttle race cover clamps (f), making certain the clamps have
snapped securely into position.
4, Put bobbin (8) into bobbin case (A).
5. Put the bobbin case into the shuttle, fitting tongue (a) into notch (c) of race cover
6. Place a single drop of oil on shuttle body as indicated by arrow on illustration.
SECTION VI
CARE AND MAINTENANCE OF YOUR MACHINE
)"'.
Hide quick links:
Advertisement
Table of Contents
