Change Settings; Picture; Sound - Philips BDP3481 User Manual

3 Change settings

This section helps you to change the settings of
this player.
1
2
3
Note
•
You cannot change a menu option that is grayed out.
•
To return to the previous menu, press . To exit the
menu, press .

Picture

1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
[TV type]: Select a color system to fit
•
your TV.
• [TV display]: Select a picture display
format to fit the TV screen.
[HDMI video]: Select an HDMI video
•
resolution.
[HDMI Deep Color]: Display colors
•
with more shades and hues when the
video content is recorded in Deep
Color and the TV supports this feature.
TV type Multi
Watch 3D video
[Picture settings]: Select a predefined
•
color setting.
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D
TV through HDMI.
Note
•
If you change a setting, make sure that the TV supports
the new setting.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
For the composite connection (via the VIDEO
connector), select a video resolution of 480i/576i
or 480p/576p under [HDMI video] to enable video
output.

Sound

1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
• [Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
[HDMI Audio]: Set an HDMI audio
•
format when this player is connected
through HDMI.
[Digital Audio]: Select an audio format
•
for the sound output when this
player is connected through a digital
connector (coaxial).
• [PCM Downsampling]: Set the
sampling rate for PCM audio output
when this player is connected through
a digital connector (coaxial).
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
EN 17