Table of Contents
Advertisement
4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip
inwards as illustrated. Position the cables together and
reinsert the clip over them to retain the cables neatly in
place behind the monitor stand.
5. Connect the power cable to a wall power outlet and
press Power on the monitor.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power key located at
the top of the row of keys on the right edge of the monitor.
Turn on the computer too, and follow the instructions in
Section 4:
Getting the most from your BenQ monitor
to install the monitor software.
on page 12
10
How to assemble your monitor hardware
Enter
Advertisement
Table of Contents
