Alarm Service Settings; Ptz Settings; Log - Storage Options IP Night/Day Camera User Manual

IP Camera User Manual

4.13 Alarm Service Settings

You can use this option to set various alarm
settings.
A. Turns on Motion Detection.
B. Set the alarms function to feed to the Pin
Settings (see Appendix I).
C. Makes the camera move to a set position
on alarm activation.
D. Send email on alarm alert.
E. Upload an image to the FTP site if set.

4.14 PTZ Settings

You can use this option to turn off the green
flashing light if it reflecting in a window.
Change the Display Mode to "Been
Extinguished".
"Enable preset" forces the camera to return to
a set position on reboot.

4.15 Log

This shows the history log of connections to
the camera.
IP Camera SON-IPC1 Version 1.0 Page 31