Advertisement
·
i;'tt"~
have to write
t~
a' disk that has been write-protected, just cover the
hele;
fOr the side whose' tab has been removed. You can use cellophane tape
to cover the hole.
Tape~
e
o
Note: There may be a different shape of the side name indication.
(*)
(4) Data read/write
The only operation the user can perform on this unit is removing and
inserting disks. All data operations are controlled by the computer. Refer to
the manual for the software in use.
- - - - - - DISK PROTECTION - - - - - - -
1. Follow the instructions on the protective envelope of the disk.
V
2. When disks are not in use, store them vertically in their envelopes in a disk
storage box. Do not lean disks against anything. This will bend them.
3. Do not bend or fold disks. A bent or folded disk is useless.
4. Information should be written on a label before it is attached to a disk.
When information must be written on a label already attached to a disk,
use a soft-tipped pen (felt making pen, etc.) Do not use a pencil or ball-
point pen - you can ruin your disk this way.
S. Do not place disks near magnetic materials. This may destroy programs
and data on the disk.
- 5 -
Advertisement
