Sharp EL-9900 Operation Manual page 3

CREATION OF A ONE-VARIABLE DATA SET
Steps for creating a non-weighted one-variable data set
1. Turn the calculator on and press STAT to enter the statistics menu.
2. Touch A (EDIT) ENTER , to view the statistics data entry screen.
If there is a data set present within the lists on your calculator, use the
arrow keys to move to the list, if necessary, and press ▲ to highlight the
list label.
3. Press DEL
4. Move the highlighter to the cell directly below the L1 in the table. Enter the
following data set:
5
by pressing 5
9 ENTER
5. To check the data you have entered, press ▲ to move back through the
data values.
6. To sort your data set in an ascending manner, press
(OPE) 1 (sortA) 2ndF
ENTER . Notice this first cell now contains the smallest value 3.
7. To save this data set, press
(StoLD) 1
8. To retrieve a data set matrix into a statistical data set, press
LIST C (L_DATA) 2 (RclLD) 1
Advanced Keyboard/STATISTICS USING THE SHARP EL-9900
Copyright © 2002, Sharp Electronics Corporation. Permission is granted to photocopy for educational use only.
ENTER to delete the old data. Repeat for other lists of data.
8 7 6
ENTER 8 ENTER
3 ENTER 5 ENTER .
L1 )
+ –
×
÷
ENTER . You can store up to ten sets of six lists.
8 9 3
7 ENTER 6
ENTER . Press STAT A (EDIT)
2ndF LIST C (L_DATA) 1
ENTER .
1
5
ENTER 8 ENTER
+ –
STAT B
×
÷
+ –
× ÷ 2ndF