Side Shelf Handle Assembly & Battery; Battery Installation - Jenn-Air 720-0336 Instructions Manual

SIDE SHELF HANDLE ASSEMBL
Estimated Assembly Time: Approximately 5-7 minutes
Required Tools: Phillips Screwdriver
1. Remove the four side shelf handle
2. Align the hole s in the side shelf handle with the holes in the side shelf.
3. Insert the sc rews and tighten.

BATTERY INSTALLATION

1.
Remove the ignition button housing.
2 .
Insert the b attery into the housing with the positive (+) terminal facing outward.
3 .
Replace the ignition button housing after the battery has been installed.
Y
screws from the side of the shelf.
5 00
400 600
300 7 00
200 800
100
7
400 500 600
30 0 700
200 8 00
10 0